Magnum One/Magnum One (Mid-American Digital) (Disc Manufacturing).iso/d21/qwhite10.arc/WINSIZE.TEC

Text File | 1990-08-16 | 8KB | 154 lines

ID:WZ Maximizing Window Size in DESQview
Quarterdeck Technical Note
by Dan Sallitt

First, the basics.  If you have any kind of expanded memory or
if you have extended memory and have placed DESQview's QEXT.SYS
driver in your config.sys file, you should be starting DESQview
with XDV.COM instead of DV.EXE.  We recommend in our manual that
XDV.COM be renamed to DV.COM, in which case you can simply type
DV at the DOS prompt and be assured that the .COM file is being
used.  Failure to start DESQview with the .COM file is the most
common reason that window size falls short of the user's
expectations.

If you are starting DESQview with the proper executable file and
you still can't open a window as large as you think you should be
able to (our documentation includes a table that gives you an
idea of what to expect), there are several common reasons.

1) Drivers and terminate-and-stay-resident programs (TSR's)
loaded before DESQview may be taking more memory than you expect.
The amount of memory available to a window inside DESQview
decreases as more memory is used up before DESQview; this is true
no matter how much extended or expanded memory is on the system.
If you want to decrease this overhead, you have a few options.

     a) Streamline your CONFIG.SYS and AUTOEXEC.BAT files.

     b) Load some programs inside DESQview.  If a TSR doesn't
have to run before DESQview (obviously, some programs, like disk
caches and print spoolers, wouldn't serve their function when
loaded inside a window), it's much more memory-efficient to let
DESQview manage it.  Even some CONFIG.SYS drivers can be loaded
inside a DESQview window using DESQview's DEVICE.COM utility.

     c) If you have the Quarterdeck Expanded Memory Manager-386
(QEMM-386), or if you have expanded memory that can be mapped
freely in the area between 640K and 1024K and you have
Quarterdeck's QRAM.SYS utility, you may be able to decrease your
memory overhead by loading devices and TSR's into high memory.
(You may even be able to do this if you have an expanded memory
manager with its own high-loading capabilities, like All
Computers' ALLEMM4.SYS for the All Chargecard.)  Any unused
address spaces between 640K and 1024K (different systems will
have different amounts of free space in this area) can be filled
with expanded memory and used to run small programs that would
otherwise occupy conventional memory.

It is worth remembering that DESQview loads itself high (with its
XDV.COM driver) in the same areas that QEMM-386 and QRAM use to
place drivers and TSR's.  If you place enough programs in high
memory before running DESQview, you will sooner or later reach a
point at which the high loading no longer increases your window
sizes inside DESQview, because DESQview will be forced to start
loading pieces of itself in low memory when high memory gets
crowded enough.  At this point one can sometimes get creative in
finding new places to put RAM in the reserved memory area between
640K and 1024K.  Which brings us to the second reason that memory
figures inside DESQview may be falling short of expectations.

2) On an extended or expanded memory system, less of DESQview may
be going into reserved memory than is possible.  To evaluate this
situation properly, it's helpful to have some experience with
DESQview's normal use of reserved memory.  A few rules of thumb
apply, however.

     a) On 80286 systems that have the first 64K of extended
memory free, DESQview's XDV.COM loader can put 63K of DESQview
code into extended memory if the QEXT.SYS driver is in the
CONFIG.SYS file.  On 80386 systems, QEMM-386 obtains the QEXT
effect automatically for you; if you are using another memory
manager, you may wish to tell it to leave behind 64K of extended
memory and use QEXT.SYS.  (Compaq's CEMM is also able to obtain
the QEXT effect without QEXT being present.)

     b) On some expanded memory systems DESQview can put some of
its code in unused video areas.  The A000-AFFF area (640K to
704K) is used for EGA and VGA graphics, and should be available
if EGA and VGA graphics aren't used.  The B000-B7FF area (704K to
736K) is used for monochrome text, and should be available on a
color system.  The B800-BFFF area (736K to 768K) is used for
color text (and sometimes for Hercules graphics), and should be
available on monochrome systems.  You can try including the
appropriate areas on your memory manager's CONFIG.SYS line.

     c) Some expanded memory managers (notably the Intel
Aboveboard Plus) only allow memory mapping to occur immediately
above the expanded memory page frame.  See our technical note on
the Aboveboard Plus for information on how to maximize this
mappable area.

     d) Adventurous users of QEMM-386 version 5.0 will notice
that the command

               QEMM ANALYSIS

gives a list of the different areas of memory that may be claimed
for DESQview and QEMM-386's LOADHI function to use. This utility,
which should be acted upon only after it has been run on several
occasions after you have run the full complement of programs that
you normally use, should give you an idea of which areas in your
system ROM may in fact be unused and available for including with
the QEMM-386 INCLUDE parameter.  There is an element of trial and
error to this process, but the rewards can be substantial.  Even
if you are using another memory manager or an earlier version of
QEMM-386, it may be possible through a series of blind attempts
to find unused ROM areas that can be included and used to
decrease your memory overhead.  The ROM area F000-F7FF, sometimes
used only by the ROM BASIC, is a favorite area to try including;
sometimes a slightly smaller inclusion, like F200-F7FF, is
necessary.  If you guess incorrectly, your machine may not boot
properly, so you may wish to keep a bootable DOS diskette handy
during this process.

3) Sometimes DESQview's Setup program contains excessive memory
allocations that cut down on DESQview's overall memory.  The two
field that most often are abused in this regard are both on the
Performance option of the Advanced Setup.

"Common Memory" is memory used by DESQview to manage its windows,
and the amount you need is usually proportionate to the number of
windows you open.  The default value is 17K; the minimum value of
13K is adequate for users who open no more than five or six
windows at once.  Few users need more than 20K of common memory.

"DOS Buffers for EMS" is memory used by DESQview to manage file
operations into expanded memory.  The default value is 2K; users
of QEMM-386 who are not on a network can set this figure to 0K
with no loss of performance and a memory savings of about 5K.
The value of this field can affect the speed of disk access;
however, it is rarely worth while to choose a value higher than
10K or 15K.

If you wish to throw away a few DESQview features, you can
probably scrimp a few more K from the Setup program.

On the Keyboard option, you can save as much as 12K if you tell
DESQview that you don't wish to use the Learn feature.  This will
disable DESQview's very useful macro system.

On the Video Monitor option, you can save anywhere from 0K to 16K
if you tell DESQview that you don't wish to display text and
graphics at the same time.  This will disable DESQview's Video
Options menu, prevent graphics programs from being seen when they
are in background, and prevent virtualization of graphics.

On the Performance option, you can save 2K by setting the "Manage
Printer Contention?" field to N.  (However, this field defaults
to N.)  This means that DESQview will not intervene to prevent
two programs from printing at the same time.

        Copyright (C) 1990 by Quarterdeck Office Systems
             * * *   E N D   O F   F I L E    * * *